image

Md. Monir Hossain, M.Sc. in Eng.

Assistant Professor, Department of Mechanical Engineering, DUET, Gazipur

Md Monir Hossain started his teaching career at the Department of Mechanical Engineering, Dhaka University of Engineering & Technology (DUET), Gazipur, in 2015. He has taught several undergraduate courses in Mechanical Engineering across different departments. Currently, he is pursuing a Ph.D. in Materials Science at Michigan State University, USA. His research focuses on environmental greenhouse gas reduction using nanoshaped catalysts.

Mobile:
Email: [email protected]
Office:
Address:
Field of interest: Simulation (Microkinetic modelling), Energy Engineering, Heat Transfer
Field of specialization: Non-Thermal Plasma, Heterogeneous Catalysis, Surface Characterization
Degrees Obtained (Starting from Recent Degrees):
# Degree Institute Year Discipline & Field
1 M.Sc. in Eng. Dhaka University of Engineering & Technology, Gazipur 2019 Mechanical Engineering
2 B.Sc. in Eng. Dhaka University of Engineering & Technology, Gazipur 2015 Mechanical Engineering
3 Diploma in Eng. Dhaka Polytechnic Institute 2010 Automobile Technology
Employment Record (Starting from Present Position):
# Designation Institute Duration
1 Assistant Professor Dhaka University of Engineering and Technology, Gazipur 2019-04-15 : Continue
2 Lecturer Dhaka University of Engineering and Technology, Gazipur 2016-02-22 : 2019-04-14
Other Related Experience (Indutry, Institution, etc.):
# Designation Institute Duration
1 Lecturer (Part Time) Dhaka University of Engineering and Technology, Gazipur 2015-11-01 : 2016-02-21
Publications (Journal):
# Year Title Authors Event
1 2025 Exploring the versatile roles of microwave energy in catalyst synthesis, treatment, and catalytic performance MM Hossain, MR Ahasan, R Wang Fuel
2 2025 Tracking structural and surface transformations in RuOx/CeO2 catalysts under plasma-assisted dry reforming of methane MM Hossain, R Wang Chemical Engineering Journal
3 2024 Dielectric Barrier Discharge Reactors for Plasma-Assisted CO2 and CH4 Conversion: A Comprehensive Review of Reactor Design, Performance, and Future Prospects MR Ahasan, MM Hossain, R Wang Energy Technology
4 2024 Non-thermal plasma enabled catalytic dry reforming of methane over a ceria nanorod supported NiO catalyst: the role of Ru as a coke resistant active site MR Ahasan, MM Hossain, R Wang Journal of Materials Chemistry A
5 2024 Influence of catalyst shape on plasma-assisted dry reforming of methane: A comparative study of Ni-CeO2 nano-cubes and nano-octahedra MM Hossain, MR Ahasan, R Wang Chemical Engineering Journal
6 2024 Coke formation pathway under various reaction conditions during the production of syngas in a dielectric barrier discharge plasma environment using CeO2 nanorods supported Ni catalysts MM Hossain, MR Ahasan, X Ding, R Wang Chemical Engineering Journal
7 2024 The development and performance evaluation of an alternative energy-based hybrid cold storage system MA Aziz, MIH Khan, HMM Afroz, MM Hossain, S Talukdar, MAA Masud Journal of Cleaner Production
8 2023 Low-Temperature Plasma-Assisted Catalytic Dry Reforming of Methane over CeO2 Nanorod-Supported NiO Catalysts in a Dielectric Barrier Discharge Reactor MR Ahasan, MM Hossain, Z Barlow, X Ding, R Wang ACS Applied Materials & Interfaces
9 2023 Non-equilibrium plasma-assisted dry reforming of methane over shape-controlled CeO2 supported ruthenium catalysts MR Ahasan, MM Hossain, X Ding, R Wang Journal of Materials Chemistry A
10 2019 Heat transfer enhancement of charging and discharging of phase change materials and size optimization of a latent thermal energy storage system for solar cold storage application S Talukdar, HMM Afroz, MA Hossain, MA Aziz, MM Hossain Journal of Energy Storage
11 2018 Deposition behavior and tribological properties of diamond-like carbon coatings on stainless steels via chemical vapor deposition L Mustafi, MM Rahman, MNEA Al Nasim, MA Chowdhury, MH Monir International Journal of Minerals, Metallurgy, and Materials
12 2018 Investigation of sustainability of lubricated journal bearing under relevant design parameters MM Shahin, MA Chowdhury, MA Kowser, UK Debnath, MH Monir Industrial Lubrication and Tribology
Publications (Conference):
# Year Title Authors Event
1 2025 Pre-Ion Plasma Treatment to Enhance Catalyst Surface Reactivity in Plasma-Assisted Dry Methane Reforming MM Hossain, R Wang 2025 AIChE Annual Meeting
2 2025 Oxygen Vacancy Dynamics in CeO2 Supported Bimetallic Catalysts: Insights from O2 Pulse Titration and in-Situ Spectroscopy for Dry Reforming of Methane MM Hossain, R Wang 2025 AIChE Annual Meeting
3 2025 Plasma-Assisted Dry Reforming of Methane Using CeO2 Nanorods Supported Single Atom Bimetallic Ni-Ru Catalysts MM Hossain, R Wang The 29th North American Catalysis Society Meeting
4 2025 Effect of Plasma Power on Intermediate Species and Reaction Temperature in the Presence and Absence of Catalysts for Dry Reforming of Methane Application MM Hossain, R Wang The 29th North American Catalysis Society Meeting
5 2025 Impact of Pre-Ion Plasma Treatment on Catalyst Efficacy in Plasma-Assisted Dry Reforming of Methane MM Hossain, R Wang The 29th North American Catalysis Society Meeting
6 2025 Catalytic SnSe2@ Mxene Composite Separators for Superior Polysulfide Regulation in Lithium–Sulfur Batteries A Mirtaleb, R Wang, MM Hossain The 29th North American Catalysis Society Meeting
7 2021 Tunable Quantum Cascade Laser Absorption Spectroscopy for Plasma Assisted Oxidative Coupling of Methane to C2 Based Products RV Ranganathan, MM Hossain, S Talukdar, R Ahasan, R Wang, M Uddi 2021 IEEE International Conference on Plasma Science (ICOPS)
8 2021 Study of Non-Equilibrium Plasma Effects on Detonation in Fuel Lean Natural Gas Mixtures S Talukdar, MM Hossain, RV Ranganathan, M Uddi 2021 IEEE International Conference on Plasma Science (ICOPS)
Course Conducted:
# Programme Course No Course Title Year
1 B.Sc. ME-1909 Engineering Mechanics-II 2020
2 B.Sc. ME-2002 Computer Programming-I 2016, 2018
3 B.Sc. ME-2004 Computer Programming 2019
4 B.Sc. ME-2307 Thermodynamics and Heat Transfer 2016, 2018
5 B.Sc. ME-2308 Thermodynamics and Heat Transfer Sessional 2016, 2018
6 B.Sc. ME 2700 Workshop Practice Sessional 2016
7 B.Sc. ME-2703 Basic Mechanical Engineering 2016
8 B.Sc. ME-2704 Basic Mechanical Engineering (Sessional) 2016
9 B.Sc. ME 3104 Fluid Mechanics and Machinery Sessional 2016
10 B.Sc. ME-3304 Production Process-II Sessional 2019
11 B.Sc. ME-3309 Fluid Mechanics and Machinery 2016-2019
12 B.Sc. ME-3310 Fluid Mechanics and Machinery Sessional 2016-2019
13 B.Sc. ME-3521 Mechanical Equipments 2016-2018
14 B.Sc. ME-4505 Power Plant Engineering 2017, 2019