image

Md. Kamruzzaman, SSC

Professor, Department of Mechanical Engineering, DUET, Gazipur

Personal Details Name : Prof. Dr. Md. Kamruzzaman Father’s Name : Abdul Wohab Biswas Mother’s Name : Amena Begum Present/Mailing Address : Professor, Department of Mechanical Engineering Dhaka University of Engineering & Technology (DUET), Gazipur-1707 Permanent Address : Village: Darikhatore, P.O.: Gorerhat, P.S.: Shalikha, Dist.: Magura. Nationality : Bangladeshi by birth Marital Status : Married Physical : Height: 5′-3″, Weight: 61.5 Kg, Blood group: O+. Academic Qualifications Exam Title Board/University Group/Subject Year of passing Division/Class Ph.D. Bangladesh University of Engineering & Technology Manufacturing 2009 Satisfactory M. Sc Engineering Bangladesh University of Engineering & Technology IPE 2004 CGPA 3.2 Out of 4 PGDTE Islamic University of Technology Production Engineering 2001 CGPA 4.67Out of 5. 1st Class 1st (Hon’s) B.Sc. Engineering Bangladesh Institute of Technology, Dhaka (At present DUET) Mechanical Engineering 1995 CGPA 3.5 Out of 4. 1st Class 1st (Gold Medal) Diploma-in-Engineering Jessore Polytechnic Institute, BTEB Dhaka Power Technology (Automobile) 1989 1st Div.8th position SSC Pulum G. S. high school, BISE Jessore Science 1983 1st Div.

Mobile: 01716993522
Email: kamruzzaman@duet.ac.bd
Office: +88-49274034-53, /4033
Address: Department of Mechanical Engineering, Dhaka University of Engineering & Technology, 1707, Gazipur, Gazipur
Field of interest: Machine tools, Manufacturing, automobile, robotic and automation
Field of specialization: Manufacturing
Degrees Obtained (Starting from Recent Degrees):
# Degree Institute Year Discipline & Field
1 SSC Pulum G. S. high school, BISE Jessore 1983 Science
2 Diploma in Eng. Jessore Polytechnic Institute, BTEB Dhaka 1989 Power Technology
3 B.Sc. in Eng. Bangladesh Institute of Technology, Dhaka (At present DUET) 1995 Mechanical Engineering
4 PGD Islamic University of Technology 2001 Production Engineering
5 M. Eng. Bangladesh University of Engineering & Technology 2004 IPE
6 PhD Bangladesh University of Engineering & Technology 2009 Manufacturing
Publications (Journal):
# Year Title Authors Event
1 2019 Tuning nanofluids for improved lubrication performance in turning biomedical grade titanium alloy Saadman Sakib Rahman, Zurais Ibne Ashraf, Akm Nurul Amin, Muhammad Shahriar Bashar, Md. Fardian Kabir Ashik and M. Kamruzzaman Journal of Cleaner Production, Volume 206, 1 January 2019, Pages 180-196, DOI:10.1016/j.jclepro.2018.09.150.
2 2018 Assessing near-dry lubrication (35 ml/h) performance in hard turning process of hardened (48 HRC) AISI 1060 carbon steel Goutam Panday, Zurais Ibne Ashraf, Khalid Ibn Muneer, Khandaker Shamail Hossain, Md. Fardian Kabir Ashik and Md Kamruzzaman, The International Journal of Advanced Manufacturing Technology, Vol. 99(1–2), November 2018. DOI:10.1007/s00170-018-2629-y
3 2018 Amelioration of diesel-biodiesel-alcohol blends properties using EHN and DTBP ignition promoter and feasibility study as CI engine fuels Kazi Imdadul Hassan, H.H. Masjuki, M.A. Kalam, M. kamruzzaman Energy Conversion and Management,
4 2017 Crystallinity, surface morphology and chemical analysis of recast layer and rutile TiO2 (110) formation on Ti-6Al-4V Eli by wire-EDM to enhance bioactivity Saadman Rahman, Md. Zurais I Ashraf, M. Kamruzzaman, Md. Mosharrof Hossain Vol. 93(9), pp. 3285-3296, December 2017. DOI:10.1007/s00170-017-0772-5
5 2017 The surface morphology, chemical composition and crystallinity of the recast layer of wire-EDM modified extra low interstitials (Eli) Ti-6Al-4V alloy Md. Zurais I Ashraf, Muhammad S Bashar, M. Kamruzzaman, A.K.M N Amin, Md. M Hossain Journal of Alloys and Compounds.
6 2017 Evaluation of oxygenated n-butanol-biodiesel blends along with ethyl hexyl nitrate as cetane improver on diesel engine attributes HK Imdadul, HH Masjuki, MA Kalam, NWM Zulkifli, M Kamruzzaman, MM Shahin, MM Rashed Journal of Cleaner Production, Journal Volume 141, pp. 928-939, Publication date 01 October 2017.
7 2017 Effect of nitrate and peroxide-based ignition promoter on diesel-biodiesel-alcohol blends and feasibility study as CI engine fuels Kazi Imdadul Hassan, H. H. Masjuki, M. A. Kalam, M. Kamruzzaman International Journal of Greenhouse Gas Control,
8 2017 Modeling of chip–tool interface temperature using response surface methodology and artificial neural network in HPC-assisted turning and tool life investigation M Kamruzzaman, Saadman Sakib Rahman, Md Zurais Ibne Ashraf, Nikhil Ranjan Dhar The Int. Journal of Advanced Manufacturing Technology, Vol. 90(5-8), PP. 1547-1568, 2017.
9 2017 Quality improvement of biodiesel blends using different fuel additives to reduce fuel consumption and NO emission from CI engine H.K. Imdadul, M.M. Shahin, H.H. Masjuki. M.A. Kalam, M. Kamruzzaman; H.K. Rashedul Vol. 138, pp. 327-337, 15 April 2017. https://doi.org/10.1016/j.enconman.2017.01.077
10 2016 Experimental Assesment of Non-edible Candlenut Biodiesel and its blend characteristics as Diesel Engine Fuel H.K. Imdadul, N W M Zulkifli, , H.H. Masjuki. M.A. Kalam, M. Kamruzzaman; M M Rashed, H.K. Rashedul and Azham Alwi BMC Environmental Science and Pollution Research, Vol. 24, pp. 2350-2363, 04 Nov 2016.
11 2016 The surface morphology, chemical composition and crystallinity of the recast layer of wire-EDM modified extra low interstitials (Eli) Ti-6Al-4V alloy Md. Zurais I Ashraf, Muhammad S Bashar, M. Kamruzzaman, A.K.M N Amin, Md. M Hossain Journal of Materials Processing Technology.
12 2016 A comparative study of C4 and C5 alcohol treated diesel–biodiesel blends in terms of diesel engine performance and exhaust emission HK Imdadul, HH Masjuki, MA Kalam, NWM Zulkifli, Abdullah Alabdulkarem, M Kamruzzaman, MM Rashed Fuel, Volume 179, pp.281-288, 01 September 2016.
13 2016 Recast layer analysis and TiO2 rutile phase formation on Ti-6Al-4V Eli alloy surface by wire-EDM to enhance osseointegration Md. Zurais I Ashraf, Muhammad S Bashar, M. Kamruzzaman, A.K.M Nurul Amin, and Md. Mosharrof Hossain Surface and Coatings Technology.
14 2012 Experimental Study on Hard Turning of Hardened Medium Carbon Steel with Carbide Insert under High-Pressure Coolant Condition Chowdhury Nusrat T., Kamruzzaman M. and Dhar N.R. Vol.12(1/2), pp.66-75, 2012. Published 17.08.2012. https://doi.org/10.1504/IJMMM.2012.048558
15 2010 Effect of High-Pressure Coolant on Temperature, Chip, Force, Tool Wear, Tool Life and Surface Roughness in Turning AISI 1060 Steel”, Kamruzzaman, M. and Dhar, N. R. GU Journal of Science, 2009. Published 27.03.2010
16 2009 The Effect of Applying High-Pressure Coolant (HPC) Jet in Machining of 42CrMo4 Steel by Uncoated Carbide Inserts Kamruzzaman, M. and Dhar, N. R. Journal of Mechanical Engineering, IEB, Dhaka, V0l. 20(2), pp. 23-32, 27 December 2009.
17 2009 Prediction of Chip and Tool Temperature in Turning C-60 Steel under High-Pressure Coolant Conditions Kamruzzaman, M. and Dhar, N. R. International Journal of Manufacturing Research (IJMR), 2009. Published 14 November 2009.
18 2009 The Influence of High Pressure Coolant on Temperature Tool Wear and Surface Finish in Turning 17CrNiMo6 And 42CrMo4 Steels Kamruzzaman, M. and Dhar, N. R. J Eng Appl Sci, Vol.4 (6), pp. 93-103, 2009. Published 20.07.2009.
19 2009 The Effect of Applying High-Pressure Coolant (HPC) Jet in Machining of 42CrMo4 Steel by Uncoated Carbide Inserts Kamruzzaman, M. and Dhar, N. R. Engineering Materials Science, Published 14 January 2009, DOI:10.3329/JME.V39I2.1849, Corpus ID: 110029218
20 2009 Effect of High-Pressure Coolant on Temperature, Chip, Force, Tool Wear, Tool Life and Surface Roughness in Turning AISI 1060 Steel Kamruzzaman, M. and Dhar, N. R. Gazi University Journal of Science, Vol.24(4), pp.359-370, 2009.
21 2009 The Effect of Applying High-Pressure Coolant (HPC) Jet in Machining of 42CrMo4 Steel by Uncoated Carbide Inserts Kamruzzaman, M. and Dhar, N. R. Journal of Mechanical Engineering, IEB, Dhaka, V0l. 20(2), pp. 23-32, 2009.
22 2009 Prediction of Chip and Tool Temperature in Turning C-60 Steel under High-Pressure Coolant Conditions Kamruzzaman, M. and Dhar, N. R. International Journal of Manufacturing Research (IJMR), 2009.
23 2009 Prediction of Chip and Tool Temperature in Turning C-60 Steel under High-Pressure Coolant Conditions Kamruzzaman, M. and Dhar, N. R. International Journal of Manufacturing Research (IJMR), 2009.
24 2008 Machining of AISI 4230 Steel with Uncoated Carbide Tools with Various Coolant Supply Pressure Kamruzzaman, M. and Dhar, N. R. Journal of Materials Processing Technology, 2008. Published 03 July 2008.
25 2008 Role of High-pressure Coolant on Cutting Temperature in Turning Steels Kamruzzaman, M. and Dhar, N. R. Journal of Manufacturing Science and Engineering, 2008. Published 30.03.2008.
26 2008 Machining of AISI 4230 Steel with Uncoated Carbide Tools with Various Coolant Supply Pressure Kamruzzaman, M. and Dhar, N. R. Journal of Materials Processing Technology, 2008
27 2007 Effect of Minimum Quantity Lubrication (MQL) on Tool Wear, Surface Roughness and Dimensional Deviation in Turning AISI-4340 Steel Dhar, N. R., Islam, S. and Kamruzzaman, M. G.U. Journal of Science, V0l. 20(2), pp. 23-32, 2007. Published 25.03.2007/2010.
28 2007 Cutting Temperature, Tool Wear, Surface Roughness and Dimensional Deviation in Turning AISI-4037 Steel under Cryogenic Condition Dhar, N.R. and Kamruzzaman, M. International Journal of Machine Tools & Manufacture, Vol. 47 (5), pp. 754–759, 2007. Published March-June 2007.
29 2006 Effects of Cryogenic Cooling by Liquid Nitrogen Jets on Tool Wear, Surface Finish and Dimensional Deviation in Turning Different Steels Dhar, N. R., Kamruzzaman, M., Khan, M.M.A. and Chattopadhyay, A.B. Int. J. Machining and Machinability of Materials, Vol. 1, No. 1, pp.115-131, 2006.
30 2006 Experimental Investigation on Effect of Minimum Quantity Lubrication (MQL) in Machining Steel Dhar, N. R., Islam, S. and Kamruzzaman, M An International Journal of Manufacturing Technology & Research, India, Vol. 2, No. 1&2, pp. 45-52, January-June 2006.
31 2006 Effect of Minimum Quantity Lubrication (MQL) on Tool Wear and Surface Roughness in Turning AISI-4340 Steel Dhar, N.R., Kamruzzaman, M. and Ahmed, Mahiuddin Journal of Materials Processing Technology , Vol.172, pp. 299–304, 2006.
32 2005 An Experimental Study of Cryogenic Cooling in Grinding Steels: Chip Formation, Temperature and Surface Roughness Dhar, N. R. and Kamruzzaman, M. Vol. ME 34, pp. 22-31
33 2005 Wear of Coated Carbide Tool, Surface Finish and Dimensional Deviation in Turning Steel under Cryogenic Cooling Dhar, N. R. and Kamruzzaman, M. AEESEAP Journal of Engineering Education, Malaysia, Vol.31:No.1, pp. 61-71, 2005. ISSN 0125-8737
34 2005 Wear Behavior of Uncoated Carbide Inserts under Dry, Wet and Cryogenic Cooling Conditions in Turning C-60 Steel Dhar, N. R., Islam, S., Kamruzzaman, M. and Paul, S, J. of the Braz. Soc. of Mech. Sci. & Eng, Vol. 28, No. 2, pp. 146-152, April-June 2006
35 2005 Experimental Investigation on Effect of Minimum Quantity Lubrication (MQL) in Machining Steel Dhar, N. R., Islam, S. and Kamruzzaman, M. Vol.4 No.1, pp. 13-24, 2005. ISSN 1684-4114
Publications (Conference):
# Year Title Authors Event
1 2020 Impacts of optimization in apparel supply chain focusing on ANN and Genetic Algorithm Shibbir Ahmad and Md. Kamruzzaman, M.Iqbal Proceedings of the International Conference on Industrial Engineering and Operations Management Aug 10-14, 2020, Detroit, MI, USA.
2 2019 Apparel supply chain optimization by developing e-commerce: An impact analysis Shibbir Ahmad and Md. Kamruzzaman, Md.Salim Hossain and Md.Mijanur Rahman Proceedings of the International Conference on Industrial Engineering and Operations Management Toronto, Canada, October 23-25, 2019.
3 2019 Supply chain optimization in apparel manufacturing Shibbir Ahmad and Md. Kamruzzaman, Mahathir Mohammad Bappy Proceedings of the International Conference on Industrial Engineering and Operations Management Toronto, Canada, October 23-25, 2019.
4 2019 Supply chain optimization with Genetic Algorithm focusing on right supplier selection at real time in apparel manufacturing Shibbir Ahmad and Md.Kamruzzaman Proceedings of the International Conference on Industrial Engineering and Operations Management Toronto, Canada, October 23-25, 2019.
5 2015 Analysis of Availability of Fire Fighting Equipment in Selected Knitting Garment Factories in Bangladesh Shibbir Ahmad and Mohammad Kamruzzaman Proceedings of the 2015 International Conference on Operations Excellence and Service Engineering Orlando, Florida, USA, September 10-11, 2015.
6 2010 Performance Evaluation of HPC in Turning AISI 4320 Steel and AISI 4140 Steel Kamruzzaman, M. and Dhar, N. R. Proceedings of the International Conference on Mechanical, Industrial and Energy Engineering, Bangladesh, MIE10-154, pp.1-6, 28 December, 2010.
7 2009 Effects of High-Pressure Coolant (HPC) Jet on Temperature, Chips and Forces in Turning AISI 1060 Steel and AISI 4320 Steel Kamruzzaman, M. and Dhar, N. R. Proceedings of the International Conference on Mechanical Engineering (ICME-2009), Bangladesh, pp. 1-7, 29 December, 2009.
8 2009 Performance Evaluation of Carbide Inserts in Turning C-60 Steel and 42CrMo4 Steel under High-Pressure Coolant (HPC) Condition Kamruzzaman, M. and Dhar, N. R. Proceedings of the International Conference on Mechanical Engineering (ICME-2009), Bangladesh, pp. 1-7, 29 December, 2009.
9 2008 Effect of High-Pressure Coolant (HPC) Jet in Machining AISI 1060 Steel by Uncoated Carbide Insert Kamruzzaman M., Chowdhury M.M.H. and Dhar N.R. Proceedings of the 2nd Intl. and 23rd AIMTDR conf., Chennai, India, pp.679-684, 29 December, 2008.
10 2008 The Effect of Applying High Pressure Coolant on Temperature, Force, Chips and Product Quality in Machining C-60 Steel with SNMM Insert Kamruzzaman, M. and Dhar, N. R. Proceedings of 12th Annual Paper Meet, The Institution of Engineers, Mechanical Engineering Division, Bangladesh, Paper ID: 189-Ex 10, pp.1-8, 27 February, 2008.
11 2008 Effect of High-Pressure Coolant on Tool Wear, Tool Life and Surface Roughness in Turning Medium Carbon Steel by SNMG Insert Dhar N.R. and Kamruzzaman, M. 9th Cairo University International Conference on Mechanical Design and Production (MDP-9), Cairo, pp. 555-565, 15 January, 2008.
12 2007 An Experimental Study of Effect of High-Pressure Coolant on Tool Wear, Tool Life and Roughness in Turning 16MnCr5 steel by SNMG Insert Kamruzzaman, M. and Dhar, N. R. Proceedings of the International Conference on Mechanical Engineering (ICME-2007), Bangladesh, Paper ID: AM-33, pp.1-7, 28 December, 2007.
13 2007 Effect of High-Pressure coolant on Tool Wear, Tool Life and Surface Roughness in Turning Medium carbon steel by SNMG Insert Dhar, N. R. and Kamruzzaman, M. Proceedings of the International Conference on Mechanical Engineering 2007 (ICME2007), 29- 31 December 2007, Dhaka, Bangladesh
14 2007 Wear Behavior of Carbide Insert under High-Pressure Coolant Jet Assisted Machining of 42CrMo4 Steel Kamruzzaman, M. and Dhar, N. R. Proceedings of the All India Conference on Recent Developments in Manufacturing & Quality Management (RDMQM-2007), India, pp.178-187, 15 October, 2007.
15 2007 Effects of High Pressure Coolant Jet on Temperature, Chip and Force in Turning 42CrMo4 Steel Kamruzzaman, M. and Dhar, N. R. Proceedings of the National Conference on Advances in Materials and Manufacturing Technology (AMMT-2007), India, pp.14-20, 18 September, 2007.
16 2007 On Effect of High-Pressure Coolant on Tool Wear and Surface Finish in Turning AISI-8740 Steel”, Dhar, N. R., Kamruzzaman, M. and Rashid, M. H. Proceedings of the International Conference on Manufacturing Automation (ICMA-2007), Singapore, pp.695-703, 08 May, 2007.
17 2007 Effect of High-Pressure Coolant on Chip, Temperature and Cutting Force in Turning AISI-1060 Steel”, Kamruzzaman, M., Dhar, N. R. and Rashid, M. H. Proceedings of the National Conference on Design, Dynamics and Manufacturing (NCDDM-2007), Punjab, India , pp.199-204, March, 2007.
18 2007 An Experimental Investigation into Tool Wear, Tool Life and Product Quality in Turning Steel under High-Pressure Coolant Condition Kamruzzaman, M. and Dhar, N. R. Proceedings of the Global Conference on Production and Industrial Engineering (CPIE-2007), Jalandhar, India, pp.1-6, March, 2007.
19 2006 Effects of Cryogenic Cooling on Temperature, Tool Wear, Surface Roughness and Dimensional Deviation in Turning AISI-8740 Steel by Coated Carbide Dhar, N. R. and Kamruzzaman, M. Proceedings of the 1st International Conference & 7th AUN/SEED-Net Fieldwise Seminar on Manufacturing and Material Processing, pp.36-41, 14-15 March 2006, Kuala Lumpur.
20 2005 Cutting Temperature, Tool Wear, Surface Roughness and Dimensional Deviation in Cryogenic Machining Dhar, N. R. and Kamruzzaman, M. Proceedings of the International Conference on Mechanical Engineering 2005 (ICME2005), pp.1-6, 28-30 December 2005, Dhaka, Bangladesh.
21 2005 MQL Applications in Grinding of 16MnCr5 Steel: A Comparison with Wet and Dry Grinding Dhar, N. R., Hossain, M. and Kamruzzaman, M. Proceedings of the International Conference on Mechanical Engineering 2005 (ICME2005), pp.1-5, 28- 30 December 2005, Dhaka, Bangladesh.
22 2005 Cutting Temperature, Tool Wear, Surface Roughness and Dimensional Deviation in Cryogenic Machining Dhar, N. R. and Kamruzzaman, M. Tehran International Congress On Manufacturing Engineering (TICME2005), PP.1-11, December 12-15, 2005, Tehran, Iran.
23 2005 A Study of Effects of MQL by Vegetable Oil on Cutting Temperature, Chips and Cutting Forces in Turning AISI-1060 Steel Dhar, N. R. , Khan, M. M. A. and Kamruzzaman, M. Proceedings of All India Seminar on Recent Advances in Manufacturing Technologies, October 22-23, 2005, NIT, Rourkela, Orissa, India.
24 2005 The Calibration of Tool-Work Thermocouple in Turning Steels Dhar, N. R., Islam, S., Kamruzzaman, M. and Ahmed, T. National Conference on Industrial Problems on Machines and mechanisms, 24th-25th February, 2005.
25 2004 Effects of Cryogenic Cooling by Liquid Nitrogen Jet on Temperature, Chips and Surface Roughness in Grinding AISI-4142 Steel Dhar, N. R. and Kamruzzaman, M. Proceedings of 4th International Mechanical Engineering Conference & 9th Annual Paper Meet, 355-361 December 2004, Dhaka, Bangladesh
Fellowship / Membership of Scientific and Professional Societies:
# Type Organization Membership Code
1 Fellow IEB 7165
Honors and Awards:
# Title Event Year
1 Gold Medal First Class First in order of Merit 1995
2 silver medal Eighth position in board merit list 1989
3 Gold Medal First class First in order of merit, Level PGDTE 2001
4 Most cited journal Elsevier journal, period 2006 to 2010 2010
Course Conducted:
# Programme Course No Course Title Year
1 B.Sc. ME-3305 Manufacturing Process 2002-2025
2 B.Sc. ME-3306 Manufacturing Process Sessional 2002-2025
3 B.Sc. ME 4509 Automobile Engineering 2002-2025
4 B.Sc. ME-4303 Machine Tools & Tool Engineering 2003-2025
5 B.Sc. ME-4304 Machine Tools & Tool Engineering Sessional 2003-2025
6 B.Sc. ME-4501 Applied Thermodynamics 2001-20002, 2002-2003
7 B.Sc. ME-4502 Applied Thermodynamics Sessional 2001-20002, 2002-2003
8 B.Sc. ME 4505 Power Plant Engineering 2001-20002, 2002-2003, 2023-2024, 2024-2025
9 M.Sc. ME-6203 Welding Science and Technology 2010-2025 after 2 or 3 semesters
10 M.Sc. ME-6211 Advanced Manufacturing Processes 2010-2025 after 2 or 3 semesters
11 M.Sc. ME-6202 Advanced Machine Tools 2010-2025 after 2 or 3 semesters
12 B.Arch. ME 6218 Advanced Engineering Production 2010-2025 after 2 or 3 semesters