image

Md. Abdur Rashid, PhD

Professor, Department of Civil Engineering, DUET, Gazipur

Have been serving as a faculty member of Civil Engineering Department in DUET, Gazipur for the last more than 34 years. Obtained B.Sc in Civil Engineering (major in Structural Engineering) and M.Sc in Civil (Structural Engineering) degrees in 1986 and 1993 respectively both from Bangladesh University of Engineering & Technology (BUET), Dhaka, Bangladesh. Completed Ph.D in Civil (Structural Engineering) in 2002 from National University of Singapore (NUS), Singapore.

Mobile: 88-01720471178
Email: [email protected]
Office: 8802-49274034-53, 2019
Address: House #64 (5th Floor), Road #15, Sector #11, Uttara Model Town, 1230, Uttara West, Dhaka
Field of interest: Concrete and high strength concrete, Brick aggregate concrete, Reinforced concrete design, Structural analysis, High-rise buildings.
Field of specialization: Concrete technology and Reinforced concrete designs.
Degrees Obtained (Starting from Recent Degrees):
# Degree Institute Year Discipline & Field
1 PhD National University of Singapore, Singapore 2002 Civil (Structural) Engineering
2 M.Sc. in Eng. Bangladesh University of Engineering & Technology (BUET), Dhaka, Bangladesh 1993 Civil (Structural) Engineering
3 B.Sc. in Eng. Bangladesh University of Engineering & Technology (BUET), Dhaka, Bangladesh 1986 Civil (Structural) Engineering
4 HSC Dhaka College, Dhaka, Bangladesh 1980 Science
5 SSC Kaitala Jagneswar High School, Brahmanbaria, Cummilla Board, Bangladesh 1978 Science
Employment Record (Starting from Present Position):
# Designation Institute Duration
1 Professor (Grade-I) Dhaka University of Engineering & Technology (DUET), Gazipur, Bangladesh 2020-01-09 : 2021-05-09
2 Professor & Chairman of the Dept. of Civil Engineering, and Dean of the Faculty of Civil, Environment & Industrial Engineering Uttara University, Uttara Model Town, Dhaka, Bangladesh 2016-01-01 : 2020-01-08
3 Professor of Civil Engineering and Dean of the Faculty of Engineering Presidency University, Gulshan-2, Dhaka, Bangladesh 2015-01-06 : 2015-12-31
4 Professor (Grade-I) Dhaka University of Engineering & Technology (DUET), Gazipur-1707, Bangladesh 2012-09-29 : 2015-01-05
5 Professor (Grade-II) Dhaka University of Engineering & Technology (DUET), Gazipur-1707, Bangladesh 2008-09-29 : 2012-09-28
6 Professor (Grade-III) Dhaka University of Engineering & Technology (DUET), Gazipur-1707, Bangladesh 2004-01-22 : 2008-09-28
7 Associate Professor Dhaka University of Engineering & Technology (DUET), Gazipur-1707, Bangladesh 1999-02-03 : 2004-01-21
8 Assistant Professor Dhaka University of Engineering & Technology (DUET), Gazipur-1707, Bangladesh 1995-03-23 : 1999-02-02
9 Lecturer Dhaka University of Engineering & Technology (DUET), Gazipur-1707, Bangladesh 1987-04-22 : 1995-03-22
10 Structural Design Engineer Home Builders Company Ltd., House #67/B, Road #13/B, Banani, Dhaka, Bangladesh 1986-02-17 : 1987-04-21
Additional Charges:
# Designation Faculty/ Department/ Institute/ Office Duration
1 Head Arch 2020-07-01 : 2021-05-09
2 Dean Faculty of CE 2008-03-31 : 2010-03-30
3 Head CE 2006-02-01 : 2008-01-31
4 Head CE 2003-01-01 : 2003-12-31
5 Provost QK Hall 1996-06-25 : 1996-11-30
6 Assistant Provost KNI Hall 1994-05-03 : 1996-06-24
Publications (Journal):
# Year Title Authors Event
1 2019 Effects of Water-Cement Ratio and Maximum Size of Coarse Aggregate on the Compressive Strength of Brick Aggregate Concrete Mohammad Abdur Rashid and Md. Asif Iqbal Dhaka University of Engineering & Technology (DUET) Journal, Vol.5, Issue 2
2 2017 Effects of Curing Methods on the Strength of Concrete Mohammad Abdur Rashid, Md. Nazrul Islam and Md. Abu Khalid Hasan Dhaka University of Engineering & Technology (DUET) Journal, Vol.3, Issue 1
3 2015 Effect of Cement Content and Size of Coarse Aggregate on the Strength of Brick Aggregate Concrete Md. Kobir Hossain, Mohammad Abdur Rashid and Md. Rezaul Karim Dhaka University of Engineering & Technology (DUET) Journal, Vol.2, Issue 2
4 2014 Influence of Moist-Curing on the Strength of Brick Aggregate Concrete Mohammad Abdur Rashid, M. A. Rahman, S. Chakma and M. K. Rahman Dhaka University of Engineering & Technology (DUET) Journal, Vol.2, Issue 1
5 2012 Effect of Replacing Natural Coarse Aggregate by Brick Aggregate on the Properties of Concrete Mohammad Abdur Rashid and Md. Abdus Salam, Sukanta Kumer Shill and M. K. Hasan Dhaka University of Engineering & Technology (DUET) Journal, Vol.1, Issue 3
6 2012 An Expert System for Mix Design of Brick Aggregate Concrete Md. Abdus Salam, Md. Nazrul Islam and Mohammad Abdur Rashid International Journal of Mechanical and Materials Engineering (IJMME), University of Malaya, Malaysia, Vol. 7, No. 1
7 2009 Properties of Higher Strength Concrete Made with Crushed Brick as Coarse Aggregate Mohammad Abdur Rashid, Tanvir Hossain and M. A. Islam Journal of Civil Engineering, The Institution of Engineers (IEB), Bangladesh, Vol. 37, No. 1
8 2009 Considerations in Producing High Strength Concrete Mohammad Abdur Rashid and Md. Abul Mansur Journal of Civil Engineering, The Institution of Engineers (IEB), Bangladesh, Vol. 37, No. 1
9 2008 Higher Strength Concrete using Crushed Brick as Coarse Aggregate Mohammad Abdur Rashid T. Hossain, and M. A. Islam The Indian Concrete Journal, Vol. 81, No. 10
10 2005 Reinforced High-Strength Concrete Beams in Flexure Mohammad Abdur Rashid and Md. Abul Mansur ACI (American Concrete Institute) Structural Journal Vol. 102, No. 3
11 2005 Behavior of AFRP Reinforced High Strength Concrete Beams under Bending Mohammad Abdur Rashid, Md. Abul Mansur and P. Paramasivam Journal of Composites for Construction, American Society of Civil Engineers (ASCE), Vol. 9, No. 2
12 2004 Considerations in Using High Strength Concrete in RC Flexural Members: A Review Mohammad Abdur Rashid The Indian Concrete Journal, Vol. 78, No. 5
13 2002 Correlations Between Mechanical Properties of High Strength Concrete Mohammad Abdur Rashid, Md. Abul Mansur and P. Paramasivam Journal of Materials in Civil Engineering, American Society of Civil Engineers (ASCE), Vol. 14, No. 3
14 1999 Microcracking in High-Strength Plain and Fibre Concretes Md. Abul Mansur, T. H. Wee, M. S. Chin, and Mohammad Abdur Rashid Journal of the Institution of Engineers, Singapore, Vol. 39, No. 2
15 1998 Ferrocement Box-Beams Subjected to Pure Bending and Bending with Shear A. A. Abdul Samad, Mohammad Abdur Rashid, M. M. N. Megat Johari and A. A. Abang Abdullah Journal of Ferrocement, Vol. 28, No. 1
16 1996 Behaviour of Reinforced Concrete Deep Beam Under Uniform Loading Mohammad Abdur Rashid and Ahsanul Kabir Journal of Civil Engineering, The Institution of Engineers (IEB), Bangladesh, Vol. CE24, No. 2
Publications (Conference):
# Year Title Authors Event
1 2017 Concrete Compressive Strength as influenced by Curing Methods Mohammad Abdur Rashid, Md. Nazrul Islam and Md. Abu Khalid Hasan International Conference on Planning, Architecture and Civil Engineering, Rajshahi University of Engineering & Technology (RUET), Rajshahi, Bangladesh
2 2016 Effect of Curing Methods on the Strength of Brick Aggregate Concrete Mohammad Abdur Rashid, Md. Nazrul Islam and Md. Abu Khalid Hasan 3rd International Conference on Advances in Civil Engineering, Chittagong University of Engineering & Technology (CUET), Chittagong, Bangladesh
3 2002 Ductility of AFRP Reinforced High Strength Concrete Beams Mohammad Abdur Rashid, Md. Abul Mansur and P. Paramasivam 6th International Symposium on Utilization of High Strength/High performance Concrete, University of Leipzig, Leipzig, Germany
4 2000 Flexural Response of High Strength Concrete Beams Reinforced with FRP Bars Mohammad Abdur Rashid, Md. Abul Mansur and P. Paramasivam 6th International Conference on Structural Failure, Durability and Retrofitting, Singapore Concrete Institute and National University of Singapore, Singapore
5 1999 Effect of Reinforcement Ratios on Flexural Behaviour of High Strength Concrete Beams Mohammad Abdur Rashid, Md. Abul Mansur and P. Paramasivam 5th International Symposium on Utilization of High Strength/High performance Concrete, Norwegian Concrete Institute, Sandefjord, Norway
Course Conducted:
# Programme Course No Course Title Year
1 B.Sc. CE-2105 Design of Concrete Structures-I 1987-2021
2 B.Sc. CE-3103 Design of Concrete Structures-II 1987-2021
3 B.Sc. CE-2101 Mechanics of Solids-I 1987-2021
4 B.Sc. CE-2103 Mechanics of Solids-II 1987-2021
5 B.Sc. CE-2003 Numerical Methods and Computer Programming 1987-1995
6 B.Sc. CE-1009 Engineering Mechanics 1987-1995
7 B.Sc. CE-3101 Structural Analysis and Design-I 1987-2010
8 B.Sc. CE-3105 Structural Analysis and Design-II 1987-2010
9 B.Sc. CE-2102 Mechanics of Solids-I Sessional 1987-1995
10 B.Sc. CE-2104 Mechanics of Solids-II Sessional 1987-1995
11 M.Sc. CE-6108 Advanced Concrete Technology 1995-2021
12 M.Sc. CE-6105 Analysis and Design of Shells 2003-2014
13 M.Sc. CE-6101 Theory of Elasticity 2004-2010
14 M.Sc. CE-6110 Analysis and Design of Tall Buildings 2004-2010